This method makes an ideal wash for winter washing or coated paint surfaces Mix an aqueous solution Optimum (OPT) No Rinse™ Wash & Shine New Formula (ONR). It contains advanced polymers and lubricants that offer more surface protection and slickness than ordinary car soap alone. It acts as a water softener and conditioner to improve the quality of the water that touches your vehicle to provide the ultimate safe wash.
How does ONR work?
[The polymers in No Rinse have reactive groups that bond and trap dirt particles making the dirt particles virtually non-abrasive. They also bond to oily particles and emulsify them into water.
The latter is equivalent to the cleaning action from soaps which also work by emulsifying oil particles into water. However, with soap there is no interaction with dirt. This is why adding No Rinse to a regular wash also helps protect the paint from dirt particles.
The No Rinse polymers also bond to all automotive surfaces and create a slick surface and act as a barrier to protect paint from marring. That is something that soap will not provide since surfactants in soaps have no affinity for painted or other automotive surfaces.
When you use 1 oz. of No Rinse in 1 or 2 gallons of water for your wash at the molecular level this provides hundreds of billions of polymer molecules to do what was said above. Additional product will not be necessary except if you are using tap water that contains high levels of minerals such as calcium hydroxide or silicates. In these cases, some of the polymers will bond to these minerals and take them out of solution therefore more product might be necessary to compensate for this effect. This is another reason why adding No Rinse to regular car wash soap improves the results when using tap water] - David Ghodoussi - Optimum Polymer Technologies
To remove stains, the surface tension that bonds them must be released, then the stain encapsulated and held in suspension to be removed. ONR is an almost waterless wash that doesn’t require rinsing, it’s formulated with surfactants to keep dirt in suspension, avoiding surface contact; it also provides surface lubrication, thereby avoiding surface marring.
A surfactant or surface active agent is a substance that, when dissolved in water, gives a product the ability to remove dirt from surfaces. They emulsify the dirt; the polymer protects the paint surface by forming a molecular bond, which remains even after the wash, offering protection comparable to that of a spray wax
Application
Avoid cross-contamination by using different micro fibre towels for differing surfaces i.e. separate towels for glass, paintwork, wheels, and interior surfaces. Mix an aqueous solution Optimum (OPT) No Rinse™ Wash & Shine New Formula (ONR). diluted 1:3 with distilled water in a spray bottle and fold the towel in quarters.
Bodywork - Spray liberally on painted surfaces and wipe clean with an OPT Foam Wash Mitt or a plush microfiber towel. Fold and use a new section of the towel as needed. When there is heavy dirt build up, use Optimum Opti™ - Clean concentrate
Glass surfaces - using a separate micro fibre towel apply one or two sprays and wipe off with a clean plush microfiber towel.
Wheels and lower paint panels - using a separate micro fibre towel, spray liberally and let it soak for a few seconds and then wipe off.
Road salt - to remove salt and road grit or to clean really soiled surfaces I would suggest a pre-rinse to remove the larger dirt particles first before being washed. Then use the ONR concentrates or the traditional two-bucket wash method or if you have a pressure washer available to remove the larger dirt / salt particles.
The number of towels and how much product you'll use will vary depending on how dirty the vehicle is but an average is five (5) towels per vehicle.
Dilution ratio- 1:3 with distilled water in a spray bottle and a similar solution /in a bucket.
Place 10 – 12 micro fibre towels in the bucket, wring one (drying) towel lightly, mist spray a panel and then take a wet towel and wipe down a panel in one direction only, change to a clean surface of the towel as necessary.
When you have cleaned the panel place the used towel in an empty bucket for washing later. With the drying towel wipe down the panel, finally with a clean, dry waffle weave micro fibre buff the panel to a shine
(Based on a method by Gary Dean)
No comments:
Post a Comment