Sunday 8 March 2015

Optimum Polymer Technologies



[While both of these products are pH neutral, Opti™ - Clean contains much higher levels of polymers than No Rinse as well as some new polymers that we developed for this type of application. The added polymers are necessary to compensate for using a fraction of the water as compared to a regular No Rinse wash] David Ghodoussi OPT.
A totally waterless wash that provides some surface protection and  its ideal for a quick clean up or for use when there is no water available (apartments, condominiums, concours d’élégance or car shows) Simply spray Optimum Opti-Clean on any surface and wipe off with a plush microfiber towel till the area is clean and dry.
Always work in a shaded area on a surface that is cool to the touch. Make sure surface is not gritty with dirt or sand to avoid scratching. Optimum Opti™ - Clean water-less wash is designed to wipe away dirt and grime from automotive paint and other surfaces safely and effectively in a spray and wipe application. The substantive polymers encapsulate the dirt and grime to protect the paint from marring while lubricating and bonding to the painted and other automotive surfaces to provide greater protection while leaving a slick glossy finish behind.
Application-
 Avoid cross-contamination by using different micro fibre towels for differing surfaces i.e. separate towels for glass, paintwork, wheels, and interior surfaces. Mix an aqueous solution Optimum (OPT) No Rinse™ Wash & Shine New Formula (ONR).diluted 1:3 with distilled water in a spray bottle and fold the towel in quarters.
Bodywork - Spray liberally on painted surfaces and wipe clean with an OPT Foam Wash Mitt or a plush microfiber towel. Fold and use a new section of the towel as needed. When there is heavy dirt build up, use Optimum Opti™ - Clean concentrate
Glass surfaces - using a separate micro fibre towel apply one or two sprays and wipe off with a clean plush microfiber towel.
Wheels and lower paint panels - using a separate micro fibre towel, spray liberally and let it soak for a few seconds and then wipe off.
Road salt - to remove salt and road grit or to clean really soiled surfaces I would suggest a pre-rinse to remove the larger dirt particles first before being washed. Then use the ONR concentrates or the traditional two-bucket wash method or if you have a pressure washer available to remove the larger dirt / salt particles.
The number of towels and how much product you'll use will vary depending on how dirty the vehicle is but an average is five (5) towels per vehicle.

Alternative ONR wash method- Mix an aqueous solution Optimum (OPT) No Rinse™ Wash & Shine New Formula (ONR) diluted 1:3 with distilled water in a spray bottle and a similar solution /in a bucket. Place 10 – 12 micro fibre towels in the bucket, wring one (drying) towel lightly,  mist spray a panel and then take a wet towel and wipe down a panel in one direction only, change to a clean surface of the towel as necessary. When you have cleaned the panel place the used towel in an empty buck for washing later. With the drying towel wipe down the panel, finally with a clean, dry waffle weave micro fibre buff the panel to a shine (Based on a method by Gary Dean)
Use Optimum Instant Detailer & Gloss Enhancer by spraying it on the panels as you dry the vehicle. This will create a super slick, incredibly glossy finish.
Note:
 If you mix with potable (tap) water the product may lose its colour; this is due to a chemical reaction with the impurities (Calcium and Magnesium) in the water; using a distilled water dilute it will not change.
The Optimum Opti-Mitt 8 Inch Foam Wash Mitt is a soft (80 – 100 PPI) nonabrasive wash mitt designed to be used with Optimum No Rinse Wash & Shine and Optimum Car Wash to remove grime without scratching. The porous foam "absorbs" dirt and oil to prevent paint marring. The coarse yellow foam is excellent at cleaning wheels. Use the Opti-Mitt every time you wash your vehicle for safe, swirl-free washing.

No comments:

Post a Comment