Friday 26 July 2013

Paint surface, depth, warmth, gloss, etc.


The oils that are formulated in Carnauba waxes provide gloss, which causes jetting (a ‘wetting’ of the surface) this distorts the light reflectance, giving the surface the ‘look’ of rippling liquidity, likened to a mirror in shallow water reflecting a three-dimensional deep, rich colour, in contrast, bees wax, paraffin and many synthetic waxes and polymer sealants tend to occlude (cloud) An optically perfect crystalline shine is the result of combining a polymer sealant for its reflective shine properties with a Carnaubas three-dimensional jetting properties.

Clean surface – both above and below surface contaminants have been removed and a chemical paint surface cleaner has been used to remove ‘ingrained dirt

Shine - a perfectly ‘flat’ levelled surface is obtained by polishing the paint surface. Shine an easily understood concept of light reflection / refraction (in simple terms the light reflectance from a mirror). Unless the paint surface is cleaned and properly levelled the surface will not have ‘shine’ (its ability to reflex light) and the other attributes (Colour, Depth and Clarity) are meaningless

Colour, Depth and Clarity- the three factors Concours d’élégance judges look for when scrutinizing paint film surfaces. So much depends on proper surface preparation, a clean and level surface, and product clarity, which allow the natural gloss of the paint to show through, as without transparency the true colours of the paint surface cannot be seen. 

Waxing a surface that has not been properly cleaned will only result in a shiny layer over dull, dirty paint - not the deep smooth, optically perfect crystalline shine that is obtainable.

Some products will maximise metallic flake, others reflectivity, or depth of shine and colour richness (wetting, also known as jetting). Factors such as durability are objective and are an easily quantifiable part in the process.

There is no one product that can produce all of the properties for an optically perfect shine, however; for high surface gloss and surface reflectance-a polymer sealant, which also provides durability. Detailing enthusiasts consider shine as only one attribute of a protective wax or sealant. They are equally concerned with; ease of application, resistance to abrasion, atmospheric contamination and weathering as well as strong cosmetic enhancement characteristics

The final result can only be as good as the surface it’s applied to. It really is all dependants upon, process over product; 85% surface preparation, 5% product suitability, 7% application methodology and the balance is in the ‘guy’ of the beholder. The other variables are; a detailer’s knowledge of the paint type, experience with a given product and skill level and experience with machine polisher.

The aesthetics of a vehicles appearance is very subjective to say the least, the only best wax or sealant that really matters is what looks 'best' to you...

No comments:

Post a Comment